Owl House Owlbert Solid Palisman 3D Print Kit | PLA Raw 3D Print Cosplay Kit

A raw 3D print of Eda's Palisman Owlbert from The Owl House. This is the SOLID version.

The combined palisman measures approx 22cm for the 25mm rod version and 20cm for the 20mm rod version from tip to base and is printed in PLA+ filament. The kit comes in two parts and does NOT include the main rod required for this prop. The connection for the rod on this prop is 25mm diameter or 20mm depending on the size you pick.

This is the SOLID version, please see my store for the hollow lightable version.

This prop has been printed using a model from SpearmasterCosplay under a commercial license. If you would like to purchase the model for yourself, please check out their shop here: https://www.etsy.com/uk/shop/IrchCards

NOTE: Please see the photos to see how the undersides or supported sections will look. While supports have been removed, artefacts may still remain along with layer lines and print artefacts such as ridges. All issues can be fixed with sanding and filling as PLA and SLA are sandable. This is a raw print kit so will require sanding / filling before its ready for clean painting.